Product details

Features
  • Matter (w/Thread)
  • Full Color Notifications*
  • Multi-Tap Scene Control*
  • Smart Bulb Mode
  • Leading & Trailing Edge Dimming
  • Non-Neutral Compatible
  • Multi-Way Compatible

    Please note that your platform must support these features. Platforms that support these features include: Apple Home, SmartThings, Hubitat, and Home Assistant.
Additional Features
  • Adjustable Dimming Speed
  • Adjustable Ramp Rate
  • Full Color LED Bar
  • Set Min / Max Dim Level
  • Overheat Protection
  • Over 20+ Parameters
Tech Specs
  • Power: 120V AC, 60Hz
  • Signal (Frequency): 2.4GHz
  • Operating Temperature Range: 32-95° F (0-35° C)
  • Maximum Load (Watts): 600W Incandescent, 300W LED, 150W CFL
  • Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Thread Module
  • Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
  • UL Certified: E528330
  • FCC Certified: 2BBTA-VTM31SN
  • IC Certified: 24756-VTM31SN
  • Thread Certified: Yes, awaiting number
  • Matter Certified: Yes, awaiting number
Compatible Platforms

The White Series Dimmer Switch works with the following platforms (if you do not see your platform listed, please reach out to support):

Amazon¹
Apple²
Google³
SmartThings⁴
Home Assistant⁵
Hubitat⁶ (C8 Only)

1. Requires a compatible device. See Amazon Echo Compatibility Chart.

2. Requires a compatible device. See Apple Compatibility Chart.

3. Requires a compatible device. See Google Home Compatibility Chart.

4. Requires a compatible device. See SmartThings Hub Compatibility Chart.

5. Requires a Thread Border Router. See Approved Thread Border Routers.

6. Requires a Thread Border Router. See Approved Thread Border Routers.

Included in the Box

  • 1x Smart Switch

  • 1x Neutral Wire Jumper

  • Instruction Manual

  • Switch Setup Insert

One Switch to Rule Them All .

For those that desire the best, you've arrived. From the sleek full color LED Bar, to the glossy finish of the switch, to the satisfying click of the paddle, enjoy Matter and Thread's first and only premium light switch.

But this switch isn't just all looks. Under the hood, we've packed in every idea, every enhancement, and thought through every scenario your smart home could become.

Built by 1,000's of our community members, this switch redefines what smart lighting can be.

FAQs

Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.

Does this switch require a hub?

Yes, this switch requires a hub that supports Thread.

What is the difference between the Red, White and Blue Series?

To understand the differences between the various series, please check out our article which breaks down the features of each.

Can this be used on fans (exhaust/ceiling) or outlets?

This switch is meant for lighting purposes only and cannot be used to control outlets, fans, or any other inductive/motorized loads. If you want an on/off switch, please check out our Blue Series On/Off Switch (w/Temperature and Humidity Sensing) and if you want a speed control switch for a ceiling fan, please check out our Blue Series Fan Switch.

Can this be used with ballasts or transformers (including LED Strips)

No, this switch cannot be used with any sort of transformer, ballast or LED Strip that has a transformer. We recommend the On/Off Switch (w/Temperature and Humidity Sensing).

Is this switch rated for ELV, MLV or any low voltage lights?

No, this switch does not work with ELV, MLV lights or any low voltage lights. Please use the On/Off Switch (w/Temperature and Humidity Sensing).

Does this switch support 240V or 277V?

No, this switch only supports 120V. If you're looking for a 277V option, please check out our On/Off Switch (w/Temperature and Humidity Sensing).

Can you turn off the LED Bar?

Yes, you can set the LED Bar intensity (off to 100%) when the light is on or off.

Is there a faceplate included? If not, what faceplate do you recommend?

No, there is no faceplate inside the box. We recommend Lutron Claro faceplates as we based our colors off of them.