Product details

Features
  • Zigbee 3.0
  • Built-in Temperature & Humidity Sensors
  • Animated Notifications*
  • Multi-Tap Scene Control*
  • Smart Bulb Mode
  • Energy Monitoring*
  • Zigbee Bindings*
  • Leading & Trailing Edge Dimming
  • Non-Neutral Compatible
  • Multi-Way Compatible

    Please note that asterisked features are built into the firmware and will only be accessible if your hub supports it. Hubs that support these features include: SmartThings, Hubitat and Home Assistant (ZHA & Zigbee2MQTT).

    As this product is still in beta, some features may change. We will notify you if they do.
Additional Features
  • 120V or 277V compatible
  • Adjustable Dimming Speed
  • Adjustable Ramp Rate
  • Full Color LED Bar
  • Set Min / Max Dim Level
  • Auto-Off Timer
  • Default Dim Level
  • Overheat Protection
  • Quick Tap To Set Level
  • Individually Addressable LED's
  • Over 80+ Parameters

    Please note that these features are built into the firmware and will only be accessible if your hub supports it. Hubs that support these features include: SmartThings, Hubitat and Home Assistant (ZHA & Zigbee2MQTT).

    As this product is still in beta, some features may change. We will notify you if they do.
Tech Specs
  • Power: 120V or 277V AC, 60Hz
  • Signal (Frequency): 2.4GHz
  • Operating Temperature Range: 32-95° F (0-35° C)
  • Max General Purpose Load (Watts): 1500W
  • Max Incandescent Load: 960W (120V) or 1385W (277V)
  • Max LED/CFL Load: 300W (120V or 277V)
  • Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
  • Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
  • ETL Certified: Coming Soon
  • FCC Certified: Coming Soon
  • IC Certified: Coming Soon
  • Zigbee Certified: Coming Soon

    For indoor use. Specifications subject to change without notice due to continuing product improvement.

    As this product is still in beta, some features may change. We will notify you if they do.
Documents

Coming Soon

Compatible Hubs

The Blue Series 2-1 Switch works with the following platforms (if you do not see your hub listed, please reach out to support):

SmartThings
Home Assistant - ZHA
Home Assistant - Zigbee2MQTT
Hubitat
Amazon Echo*

*Requires a compatible version. See Amazon Echo Compatibility Chart.

Included in the Box

  • 1x Smart Switch

  • 1x Neutral Wire Jumper

  • Instruction Manual

  • Switch Setup Insert

One Switch to Rule Them All .

For those that desire the best, you've arrived. From the sleek full color LED Bar, to the glossy finish of the switch, to the satisfying click of the paddle, enjoy Zigbee's first and only premium light switch.

But this switch isn't just all looks. Under the hood, we've packed in every idea, every enhancement, and thought through every scenario your smart home could become. Plus we added a temperature and humidity sensor in just for fun!

Built by 1,000's of our community members, this switch redefines what smart lighting can be.

FAQs

Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.

Does this switch require a hub?

Yes, this switch requires a hub that supports Zigbee.

What is the difference between the Red, White and Blue Series?

To understand the differences between the various series, please check out our article which breaks down the features of each.

Can this be used on fans (exhaust/ceiling) or outlets?

Yes, this switch can be used on any fan or outlet as long as it falls within the max load requirements.

Can this be used with ballasts or transformers (including LED Strips)

Yes, this switch can be used on ballasts and transformers (including LED Strips).

Is this switch rated for ELV, MLV or any low voltage lights?

Yes, as long as 120V reaches the switch, it can control any ELV, MLV or low voltage lights.

Does this switch support 240V or 277V?

This switch does not support 240V, but it does support 277V, making it perfect for commercial use.

Can you turn off the LED Bar?

Yes, you can set the LED Bar intensity (off to 100%) when the light is on or off.

Is there a faceplate included? If not, what faceplate do you recommend?

No, there is no faceplate inside the box. We recommend Lutron Claro faceplates as we based our colors off of them.